INVERTEK Brake-Motor 4KW 112-28 4Pole 415V 3ph 50HZ B5 IP66 TENV

INVERTEK Cast Iron Premium Efficiency (IE3) 4kW 4 Pole 3 phase AC Motor.
112M Frame, B5 Flange Mount with top mounted terminal box, IP66, TENV.

Power: 4kW at 400V or 690V 50Hz.
Speed: 1450rpm at 50Hz.
Torque: 26.3Nm at 50Hz.
Full Load Current with links in DELTA (400V 3ph): 8.23A
Full Load Current with links in STAR (690V 3ph): 4.77A.
Power Factor: 0.79 when mains connected at 50Hz.
Efficiency: 88.8% (IE3) at 50Hz.

For use with Variable Frequency Drives or a fixed frequency 400V three phase mains supply at 50Hz.
AC Inverter Maximum Speed: 90Hz, 2610rpm. Reduced Torque rating from 50Hz to 90Hz. 
AC Inverter Minimum Speed: 5Hz, 145rpm. Reduced Torque rating from 25Hz to 5Hz if continually operated in this speed range.
Performance details of the motor with an AC Inverter are given in the datasheet below.
Set terminal box links 'three a-breast' for 400V 'Delta' connection. Delta connection is required when using a 400V three phase AC Inverter or when connected directly to a 400V three phase mains supply.
Set terminal box links ‘two at one side’ for 690V 'Star' connection. 

IP66 TENV (Totally Enclosed Non Ventilated).
250mm Wide x 394mm Long x 317mm High. (Overall dimensions including shaft)
Flange mount on 4 x 15mm holes spaced on 215mm PCD with 180mm diameter spigot in the 250mm diameter flange.
Shaft: 28mm diameter x 60mm long.
Motor Housing: Cast Iron.

Brake: BFK458 32Nm

Weight: 46.7kg.

Rated at 40C Ambient. (Ventilation space required for air intake)
Thermistors: Fitted