INVERTEK Brake-Motor 1.5KW 4P 90-24 240/415V 3ph 50HZ B3 IP66

INVERTEK 1.5kW 3ph 4 Pole B3 Foot 90L Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.

Output: 1.5kW at 1430rpm, 230V or 400V, 50Hz 3ph.
Speed Range from Inverter Supply: From 5rpm to 70rpm for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Fitted with Electronic Holding brake and emergency hand release handle
Brake Torque 23Nm
Brake Voltage: 205Vdc. (Full wave rectifier)
As Default the brake is connected to one phase and the star point in the motor terminal box which gives the 205Vdc required. However if used with an AC Inverter these brake connections must be connected to a separate 230V 1ph supply to operate the brake as the AC Inverter output is not suitable.

Full Load Current with links in Delta for 230V 3ph: 5.94A.
Full Load Current with links in Star for 400V 3ph: 3.43A. (Default).
Torque: 10.02Nm
Power Factor: 0.74 when mains connected at 50Hz.
Efficiency: 85.3 (IE3)

Terminal box position: Top (default), sides (move feet).
Enclosure rating: IP66

176mm Wide x 397mm Long (Including shaft) x 231mm high overall (Including terminal box)
Foot mount on 10mm holes at 140mm wide x 125mm centres 56mm back from the shaft shoulder
24mm diameter, 50mm long with 8mm key
Construction: Aluminium with removable feet.
Weight is 18kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.